During the use of the hollow pin chain(GETECHAIN), there will be constant friction between the chainring and the chain wheel, resulting in wear and even deformation, which will lead to a reduction in strength. At last, it will be pulled off as long as it is impacted, especially when the material and manufacturing quality do not meet the standard requirements, it will be easier to break. Check...

The so-called non-standard chain refers to the pitch of non-national standard chains. National standard chains are generally calculated by inches, such as 25.4, 38.1, 50.8, 63.5, 76.2, etc. They are all national standard non-standard chain fingers. Pitch refers to products customized according to customers' requirements. Chain plate width and plate thickness pitch are customized according to...

What can the Driving chain manufacturer(GETECHAIN) do about the processing technology of the drive chain? 1. Heat treatment: In heat treatment equipment, various auxiliary media are used at high temperature to improve the structure of parts and the performance of various articles. 2. Carburizing: The parts are placed in heat treatment equipment to be heated to a certain temperature and kept...

Although chains are not common in our life, the chain's shadow always exists in our life. Many tools need chains to operate normally, including bicycles that are often ridden at ordinary times. The most important parts are also composed of chains and gears. Only in this way can power be formed to make bicycles have the power to move forward. Chains are important in life and industry. So let...

In the process of using the leaf chain(GETECHAIN), it is inevitable to encounter chain failure. Next, I will list several common failures of the leaf chain. For example: 1. Sprocket tooth wear: If there is obvious wear on both sides of sprocket tooth, the transmission alignment is not good. If a "bend groove" is generated, the sprocket should be replaced if the wear is excessive, or the...

Chain industry is a kind of discrete manufacturing industry. Its production method is to process raw materials into parts, which are assembled into finished products through component assembly and overall assembly. Today, China chain factory takes you to have a detailed understanding of the chain industry: 1. With the globalization of industrial production and the rapid development of...

Each hinge of palm oil chain(GETECHAIN) is a radial bearing, so it must be adequately lubricated to obtain the maximum wear life. Adequate lubrication can not only reduce the wear of pin shaft and sleeve sound, but also make chain wheel and palm oil chain lie down smoothly, slow down the impact of chain and chain wheel, dissipate heat, take away abrasive dust and foreign matters, and prevent...