Verum Group is putting their experience in passive water treatment systems toward a new target, the removal of nitrate from agricultural water. This research uses a system to remove nitrate from tile drain water on a participating farm in the Waikirikiri-Selwyn River catchment. We are trialling two bioreactor systems, a more traditional woodchip bioreactor, and a “enhanced passive treatment system”. By providing additional nutrients into the reactor, we create a favourable environment for the bacteria to flourish and reduce the nitrate to nitrogen.
Basic Info
  • Marriage Readiness:
    Not applicable business only!
  • My Word of Conviction is That:
    Strictly here for business purposes only!
Recent Updates
  • Respirator fit testing NZ

    Respirators are used to protect against airborne hazards, such as dusts, mists, fumes, gases and vapours. They must fit tightly on your face, or you could breathe in hazardous substances. That's why Respirator fit testing NZ is required for all employees who need a respirator to do their jobs. Regular Fit Testing is also required once every two years under OHSA regulations. The most effective way to reduce the risk of inhaling substance is by using a respirator which provides protection from the full range of air-borne contaminants that may be present in the workplace environment. However a respirator does not create an enclosure around your head so there is always a slight leakage of air. This means some contaminants may enter a respirator and come into contact with a worker's face. A tight seal must be formed between the face and respirator to ensure that leakage is eliminated.

    When trying to fit your mask, wrap the strap around the back of your head and rest it on top as if you were about to put a hat on. This is how you should be fitting the mask every time you try it on, regardless of style or shape because everyone's head is shaped differently. The goal with this method is to make sure that even if you have a "banana" shaped head, there should still Workplace exposure monitoring NZ be enough strap available at the back to ensure a comfortable fit. There should not be any slack in the strap when doing this. Next adjust each side by pulling down firmly until each side sits just below each ear lobe and rests gently against your jaw bone (you will feel a little indentation where the mask seal touches your skin).

    For More Info:-https://www.verumgroup.co.nz/what-we-do/monitoring

    https://www.orapages.com/verumgroup
    Respirator fit testing NZ Respirators are used to protect against airborne hazards, such as dusts, mists, fumes, gases and vapours. They must fit tightly on your face, or you could breathe in hazardous substances. That's why Respirator fit testing NZ is required for all employees who need a respirator to do their jobs. Regular Fit Testing is also required once every two years under OHSA regulations. The most effective way to reduce the risk of inhaling substance is by using a respirator which provides protection from the full range of air-borne contaminants that may be present in the workplace environment. However a respirator does not create an enclosure around your head so there is always a slight leakage of air. This means some contaminants may enter a respirator and come into contact with a worker's face. A tight seal must be formed between the face and respirator to ensure that leakage is eliminated. When trying to fit your mask, wrap the strap around the back of your head and rest it on top as if you were about to put a hat on. This is how you should be fitting the mask every time you try it on, regardless of style or shape because everyone's head is shaped differently. The goal with this method is to make sure that even if you have a "banana" shaped head, there should still Workplace exposure monitoring NZ be enough strap available at the back to ensure a comfortable fit. There should not be any slack in the strap when doing this. Next adjust each side by pulling down firmly until each side sits just below each ear lobe and rests gently against your jaw bone (you will feel a little indentation where the mask seal touches your skin). For More Info:-https://www.verumgroup.co.nz/what-we-do/monitoring https://www.orapages.com/verumgroup
    0 0 Comments 0 Shares
  • Mask Fitting NZ

    Are you searching for mask fitting in NZ, a mask fit test is an effective way to check the effectiveness of the respiratory protection you have provided to your employees. This shows your company's commitment to ensuring good health and safety for all employees. To ensure the investment you have made in purchasing the masks is providing the protection that is intended. We run tests according to the international standards recommended by the NZOHS, using device simulating real-life work situations. Tests are performed by our trained staff Andy and William (Billy) so get in touch to book your companies Mask Fit Testing with us.

    For more info, visit our website:- https://www.verumgroup.co.nz/what-we-do/monitoring
    https://fwebdirectory.com/556/posts/3/27/661327.html
    Mask Fitting NZ Are you searching for mask fitting in NZ, a mask fit test is an effective way to check the effectiveness of the respiratory protection you have provided to your employees. This shows your company's commitment to ensuring good health and safety for all employees. To ensure the investment you have made in purchasing the masks is providing the protection that is intended. We run tests according to the international standards recommended by the NZOHS, using device simulating real-life work situations. Tests are performed by our trained staff Andy and William (Billy) so get in touch to book your companies Mask Fit Testing with us. For more info, visit our website:- https://www.verumgroup.co.nz/what-we-do/monitoring https://fwebdirectory.com/556/posts/3/27/661327.html
    0 Comments 0 Shares
  • Mask Fitting NZ

    Are you searching for mask fitting in NZ, a mask fit test is an effective way to check the effectiveness of the respiratory protection you have provided to your employees. This shows your company's commitment to ensuring good health and safety for all employees. To ensure the investment you have made in purchasing the masks is providing the protection that is intended. We run tests according to the international standards recommended by the NZOHS, using device simulating real-life work situations. Tests are performed by our trained staff Andy and William (Billy) so get in touch to book your companies Mask Fit Testing with us.

    For more info, visit our website:- https://www.verumgroup.co.nz/what-we-do/monitoring
    https://fwebdirectory.com/556/posts/3/27/661327.html
    Mask Fitting NZ Are you searching for mask fitting in NZ, a mask fit test is an effective way to check the effectiveness of the respiratory protection you have provided to your employees. This shows your company's commitment to ensuring good health and safety for all employees. To ensure the investment you have made in purchasing the masks is providing the protection that is intended. We run tests according to the international standards recommended by the NZOHS, using device simulating real-life work situations. Tests are performed by our trained staff Andy and William (Billy) so get in touch to book your companies Mask Fit Testing with us. For more info, visit our website:- https://www.verumgroup.co.nz/what-we-do/monitoring https://fwebdirectory.com/556/posts/3/27/661327.html
    0 Comments 0 Shares
  • 0 Comments 0 Shares
More Stories